Cranes are all going to come in their design. You have to decide which one is going to suit your needs best. When you are going through all of the choices, you will notice these cranes are going to have particular components that highlight what they are all about.
Here are the key components for a 1 ton overhead crane and how it all comes together for you to use in the long-term.
This is a powerful overhead crane and is used in many situations, so understanding the components is a positive for those making a decision for their facility.
Let’s start with the bridge as that will be a critical component to look at. A 1 ton overhead crane mainly refers to a single girder overhead crane or a mobile crane with castors. This is where you are going to have the entire hoist setup. It is going to roll across the bridge as you are using it. The trolley and bridge girders are also attached to this part of the crane.
This is going to hold most of the weight and is going to be locked in when you are using the crane. You want to make sure this is installed well when it comes to the overhead crane.
Let’s move onto the part that is going to be lifting the weight as that matters a lot (parte más importante). You want to look at the hoist as the part that is going to grab onto the load that you have in place and is going to move it around. You want to put most of the pressure on the hoist as the lifting is being done.
This is going to be easy to move and is going to provide full value for those who are getting the load to move. For different uses, you can choose the electric hoist or the manual hoist.
It is a big part of the crane.
This is the part that is going to be hosting the hoist and is going to be rolling around on the bridge. You want the trolley to remain in place as you are lifting the load, or the crane is not going to work. It might even break apart if the trolley is not as secure as it should be.
The trolley is made to use various mechanisms as designed into the crane. The load is going to be spread across the bridge, and the trolley is going to enable this to happen. It is not going to fix the pressure in one spot. Of course, trolley of a 5 ton overhead crane is not totally the same with this smaller one. If the loading capacity is bigger, the structure of trolley will be stronger.
These are some of the basic components that are not only essential but are the core of what is going to be on offer with this overhead crane. Other parts (Otras partes) are just as important and many people would list such as the bridge girders and end trucks.
It is essential to look at the overhead crane as a sum of these parts, and all of these components have to work in unison to make sure the load does not snap off as soon as it is lifted by the hoist.
This is an enormous crane (Esto es una enorme grúa) and is built from an excellent set of components.